PRIMER 22.1

Pre-Programmed Views

+/-XY	Is a plan on model XY, looking down/up Z.
+/-XZ	Is a plan on model XZ, looking down/up Y,
+/-YZ	Is a plan on model YZ, looking down/up X,
+/-ISO	Is an isometric view (equal angles for X,Y,Z).

These views are also available from shortcut keys 1,2,3 etc. Default: +XY. This can be configured in the oa_pref file using:

primer*initial_view_orientation: < view >

These views only apply rotations, they do not affect scale or position.