PRIMER 22.1
Path Drawn As
Path Drawn As
All the images below show the belt path near the shoulder slipring. The belt thickness has been made artificially large to demonstrate the various modes more clearly. | |
 Thick shaded draws the belt path in fully shaded and hidden modes, showing its actual thickness. | |
 Thick Wireframe draws the belt path in wireframe (lines, see-through) mode, showing its actual thickness | |
(Prior to V13 this was the only display mode available). |
Controls how the fitting path is drawn.
Skeleton Wireframe draws the belt path in wireframe, at its centreline location with no thickness.