Main Panel

Main Panel

IMPORTANT: If the user hovers over the labels in the panel, then some additional information will be displayed about their meaning.

The panel marked with blue shows full volume (maximum volume) of the fuel tank, wall volume (shell area * thickness) and total area of the shells.
The panel marked with orange is for volume based analysis user inputs volume and height values with wetted surface area will be output.
The panel marked with purple is for height based analysis user inputs height and corresponding volume with wetted surface area is output.

At the very top of the main menu, there is a button Write to File. The user has a chance to write results to an Excel or csv file. In order to do that, the user must run some type of calculation/analysis on the geometry.

In main window there are 2 checkboxes at the top of the panels:

Include Thickness

Will include thickness of the shells in calculations. Furthermore, it understands whether the shell definition is outer, middle or inner surface. The thickness is based on the following formula: Shell area*Shell thickness. Note that there are some inaccuracies to this method as there might be some overlapping or inconsistencies of volumes:

Draw Lines

Will visualise resting liquid levels by drawing a line around the perimeter of the geometry and displaying information like volume and height.