PRIMER 22.1

"Key In" Syntax When Model and/or Type Codes Must Be Defined for Labels

In the example above, the model id and type code (Part) were both known, so simple numbers were adequate.

However, in some situations multiple types may be possible (for example "element" permits "solid, shell, beam, ...") and the type code acronym must prefix the labels.

For example to select:

Solid 27 and
Shells 1 to 20 and
Beam 99

You must define

H27 S1:S20 B99

It is also possible that selection across multiple models will be permissible.

For example to select:

Model 1: Solid 27 and
Model 2: Shells 1 to 20 and
Model 3: Beam 99

You must define

M1/H27 M2/S1:M2/S20 M3/B99

Previous | Next