PRIMER 22.1
Introduction
Introduction
The script calculates impact points on a vehicle model for the FMVSS226 specification.
The following figure shows "Input" panel of ejection mitigation script:
The following options are available on the input panel:
| Settings file | A settings file may be read or written which may include mandatory information and other data required to compute standard impact points. The reading/writing of a settings file is optional. |
| Offset distance | The offset distance is the distance away from the edge of the daylight opening used when positioning. By default this is set to 25mm. |
| Vehicle direction | Specify the vehicle direction (either +ve X or -ve X). |
| Window selection | Specify impact points to be calculated for (either the forward or rear window). |
| Window glass or centre | Either specify a PART/PARTs that surround the daylight opening or the approximate centre point of the daylight opening and maximum translations in X, Y and Z (set the max values to approximately the size of the daylight opening). |
| Velocity | Velocity is set to 16 km/h by default. |