Adding Entities by All

Adding Entities by All

Press the All button. The screen changes to:

Selecting ADD or REMOVE The green ADD button indicates that PARTs will be added to the group. If you want to remove PARTs instead of adding PARTs to the group, then the Add/Remove popup button can be used to change the action. If REMOVE is selected the button will change to red.

Using a box

	In the above example we are adding all PARTs to the group. We are not using a box to limit the selection as no box is selected, If instead we wanted to add the elements from all PARTs that are in box 1 this can be done by clicking on the no box button. The display will change as shown on the left.
	Until a box is selected the APPLY button will be inactive. You can turn off the box selection again by pressing the in box button. Once a box is selected by either typing in the box number or using the popup menu it will turn blue and the APPLY button will be activated.

Saving into the group

Once you have chosen to Add/Remove and if you want to use a box or not the selection can be saved into the group by pressing the APPLY button.

After the selection is saved to the group the screen refreshes back to the main screen (shown above). The feedback button (at the top of the image) changes to show that 1 selection of PARTs by all has been added. Additionally this is shown on the PART entity button. In this way you can easily see what entity types are present in the group.